
Sheet Metal Cutting Projects
Application industry of the fiber laser cutting machine
1. Laser cutting machine for automobile manufacturing. Many aspects of the automobile manufacturing industry can be solved by laser cutting machines, such as car doors, body, floor, hood, rear cover, airbags, etc.
2. Laser cutting machine for hardware products. Bathroom hardware, hotel hardware, hardware decorations, hardware crafts, etc.
3. Kitchenware laser cutting machine. The laser cutting machine can meet all kinds of customized production.
4. Sheet metal laser cutting machine.
5. Advertising laser cutting machine.
6. Lighting laser cutting machine. For personalized lighting material cutting
7. Fitness equipment laser cutting machine.
The laser cutting machine can cut and perforate various traditional or special-shaped pipes such as round pipes, square pipes, elliptical pipes, D-shaped pipes, etc., and process any complex curve graphics on the pipe surface without being limited by the difficulty of the graphics, and the cutting The pipe section does not require secondary processing and can be directly welded, which greatly shortens the production period.
Sample display

Cutting advantage
(1) High precision, fast speed, narrow cutting seam, minimum heat-affected zone, smooth cutting surface without burrs.
(2) The laser cutting head will not touch the surface of the material and will not scratch the workpiece.
(3) The slit is the narrowest, the heat-affected zone is the smallest, the local deformation of the workpiece is minimal, and there is no mechanical deformation.
(4) The processing flexibility is good, it can process any graphics, and it can also cut pipes and other special-shaped materials.
(5) It can cut any hardness materials such as steel plate, stainless steel, aluminum alloy plate, cemented carbide, etc. without deformation.
Products Recommended

Working area | 1500mm*3000mm |
Laser type | Max power 2000W |
Control system | AU3TECH control system |
Worktable | Sawtooth with material load shafting |
Fiber laser head | AU3TECH laser head |
Y-Axis transmission | Double WMH HERION helical rack & Opinion,TBI square guild from Taiwan |
X-Axis transmission | TBI guild and WMH helical from Taiwan |
X,Y-Axis wheel gear | WMH from Taiwan |
Y-axis Drive tools | 2 sets of 750W FUJI servo motor |
X-axis Drive tools | 1 set of 750W FUJI servo motor |
Z-axis drive tools | 1 set of 400W FUJI servo motor |
MOTOREDUCER | MOTOVARIO made in France. |
Cooling tools | CW6000 Chiller |
Transformer | WUHAN JIUCHUAN 8KW Dry type transformer |
Exhaust fan | 1000W |
Service life of Fiber laser power supply | Over 100000 hours |
Cutting speed | ≤30m/min according to materials |
Location accuracy | ±0.03mm/m |
Repeat location accuracy | ±0.02mm/m |
Min Line Width | 0.02mm |
Equipment power | 16KW |
Laser wave length | 1060nm |
Power supply | 3-phase 380V/50Hz/20KVA |
After-sales Service Provided | Engineers available to service machinery overseas |

Product advantages:
1.Best stable laser beam,could have small laser point even use the long focus distance.
2.Special wave length(1064nm), could also cut copper,aluminum,copper high reflect materials.
3.High Photoelectric conversion rate>25%,more higher than CO2(<10%), the power loss is greatly reduced
4.The laser travels through the fiber,Basically has no transmission loss
5.No need to maintain the laser power supply and laser beam transmission system.
6.Service life-over 100000 hours.
7. Highly sensitive and follow-up cutting head applies capacitance sensor monitoring, offering automatic adjusting function with stable and fast cutting
The control box of fiber laser cutting machine is configured separately to reduce interference and easy to maintain.
To ensure the stability and avoid signal interference,we use the following measures based on electrical technology :
- The main circuit and control circuit are connected by wires separately bypass.
- The wire of main controller use shielded or twisted wire.
- The connection of motor and driver use separate outlet to avoid parallel with other wires.
4.I/Q interface chip,controller,sensor,and connector are as close as possible.
5.The connect wire between upper and lower equipment use the Aerial plug connector and Weidmuller terminal block.
Cutting parameters
Materials | Thickness (mm) | 1000W | 1500W | 2000W | 3000W | 4000W |
Max cutting speed m/min | Max cutting speed m/min | Max cutting speed m/min | Max cutting speed m/min | Max cutting speed m/min | ||
Carbon steel | 1 | 24~26 | 34~37 | 45~47 | 48~50 | 50~53 |
2 | 8~9 | 12~14 | 16~17 | 19~20 | 20~22 | |
3 | 2.8~3 | 2.9~3.2 | 3.4~3.6 | 3.5~3.7 | 4.0~4.3 | |
4 | 2.2~2.4 | 2.4~2.6 | 3.1~3.2 | 3.3~3.4 | 3.4~3.6 | |
5 | 1.5~1.7 | 1.8~2.0 | 2.5~2.8 | 2.9~3.1 | 3.1~3.3 | |
6 | 1.2~1.4 | 1.6~1.8 | 2~2.2 | 2.3~2.5 | 2.5~2.7 | |
8 | 1.0~1.1 | 1.1~1.3 | 1.5~1.7 | 1.8~2.0 | 2~2.3 | |
10 | 0.75~0.85 | 0.9~1.0 | 1.2~1.4 | 1.5~1.7 | 1.8~2.0 | |
12 | 0.6~0.65 | 0.8~0.9 | 1~1.1 | 1.2~1.4 | 1.5~1.6 | |
14 |
| 0.6~0.7 | 0.9~1.0 | 1~1.1 | 1.2~1.4 | |
16 |
| 0.5~0.6 | 0.8~0.85 | 0.85~0.9 | 1.0~1.1 | |
18 |
|
| 0.7~0.75 | 0.7~0.75 | 0.9~1.0 | |
20 |
|
| 0.55~0.6 | 0.6~0.65 | 0.65~0.7 | |
22 |
|
|
|
| 0.55~0.6 | |
Stainless steel | 1 | 21~23 | 32~35 | 45~48 | 35~37 | 40~43 |
2 | 6.5~7 | 9~10 | 14~15 | 13~15 | 19~21 | |
3 | 2.3~2.5 | 4.2~4.5 | 6.5~7 | 7~8 | 11~13 | |
4 | 1.4~1.6 | 2.1~2.3 | 3.5~4 | 4.5~5.5 | 6.5~7 | |
5 | 0.6~0.7 | 1.6~1.8 | 2~2.2 | 2~3.5 | 3.5~4 | |
6 | 0.5~0.6 | 1.0~1.2 | 1.3~1.5 | 1.7~1.9 | 2.2~2.5 | |
8 |
| 0.5~0.6 | 0.7~0.8 | 0.8~1.0 | 1.5~1.7 | |
10 |
|
| 0.55~0.6 | 0.6~0.7 | 0.8~0.9 | |
Aluminum plate | 1 | 19~21 | 30~32 | 40~42 | 30~33 | 35~37 |
2 | 4.5~5 | 8~9 | 12~13 | 10~12 | 15~17 | |
3 | 1.8~2 | 3.8~4.2 | 5.5~6 | 5.5~5.9 | 6.5~7 | |
4 |
| 2~2.2 | 2.5~3 | 2.8~3.2 | 4.5~4.8 | |
5 |
| 0.8~1.0 | 1.2~1.8 | 1.6~2.2 | 2.2~2.6 | |
6 |
|
| 0.9~1.1 | 0.7~0.8 | 2~2.2 | |
8 |
|
|
| 0.5~0.6 | 1~1.2 | |
Copper plate | 1 | 16~18 | 25~27 | 30~34 | 38~40 | 44~46 |
2 | 3~3.5 | 7~8 | 10~12 | 15~18 | 20~23 | |
3 | 1.1~1.3 | 2.7~3 | 2.8~3.2 | 4.5~5 | 6.5~6.8 | |
4 |
| 1.5~1.7 | 2.5~3 | 3~3.5 | 4.5~4.7 | |
6 |
|
| 0.9~1.1 | 1~1.2 | 1.3~1.5 | |
8 |
|
|
|
| 0.7~0.8 |
Packing term.
1.the machine will be depart into few parts, the fiber power supply, distribution will be packed independently.
2.Machine body will be set on one standard export plywood board, and be fixed well,then surround by film,let every parts be fixed stability well.
3.Use plywood surround the machine, and fixed by metal line,let the machine be protect well.
Warranty term.
1.2 years’ warranty for the whole machine and fiber power supply.
2.Free training on our factory, you could arrange worker to our place study how to install,operate and maintain the machine.we also could arrange worker to your place offer training.
3.we offer free on line service, if have any problem or confusing when operate the machine, could contact me any time, we will offer scheme to resolve the problem.